Non-ironing Finishing Agent TY-111
Description:

TY-111 is a polycarboxylic acid non-ironing finishing agent, which is completely free of formaldehyde. It is suitable for the non-ironing and finishing of the cotton woven fabric, its effect is close to 2D resin. The retention rate is slightly higher than 2D resin. In order to achieve a better no-iron effect, it needs to be matched with the catalyst WSHP (50% content) when used.

Status:

1.Appearance (20 ℃)          light yellow transparent liquid

2.PH                                    1-2

3.Content (%)                     50 ± 1

4. Specific Gravity (20 ℃)   1.2 g/ cm3

Product Features:

1.TY-111 is a polycarboxylic acid non-ironing finishing agent. The non-ironing effect of the finished cotton woven fabric can reach to grade 3.5.

2. Can mix with our silicone softener TY-500, the strength retention rate of fabric can reach to 70%.

Application Method:

1、The recommended dosage is as below:

Non-ironing agent TY-111: 150g/L

Catalyst WSHP (50% content):100g/L

Softener TY-CT500: 20g/L

Customers can also adjust the dosage of TY-111 and WSHP according to the specific product requirement.

2、Finishing process:

DP Finishing liquid (pick up ratio 60% - 80% ), dry (80-100 ℃), baking (160 ℃ * 3 min)

Packaging:

120kg or 200kg plastic barrel, can be stored for 12 months under room temperature and hermetic conditions. If the temperature is too low, there will be solid precipitate, which need to be heated and dissolved before using.

    BACK

Copyright(C)2017,Sheyang Tianyuan Chemical Co., Ltd.

All Rights Reserved. Supported by ChinaChemNet ChemNet Toocle Copyright Notice