Nylon Low-temperature Degreaser TY-1180
Product Introduction:

Made by compounding special polymer with anionic/nonionic surfactants.

Technical Indicators:

Appearance: Yellow liquid

PH value (1% aqueous solution): 5.0-7.0

Ionic: Negative/Non Ionic

Solubility: Easy to dissolve in hot water

Performance Advantages:

1. It has excellent ability to remove oil stains and emulsify and disperse, which can remove heavy stains (wax and oil stains caused by weaving and spinning) on the surface of fabrics, and maintain these stains in a suspended state in the dye solution to avoid re staining, especially suitable for pre-treatment in the same bath as dyeing;

2. The chemical composition can help prevent the accumulation of nylon oligomers, and can also remove accumulated oligomers in long used engine cylinders;

3. Excellent oil and dirt removal performance, with significantly lower residual fat rate after refining compared to using other refining agents;

4. It has strong cleaning power and anti re staining ability for silicone oil in the oil agent, effectively preventing the occurrence of stains;

5. High concentration product, cost-effective, APEO free.

Usage:

Mainly used in the pre-treatment process of fabrics

Boil the high concentration solution 1 to 4 before use, with a recommended dosage of 1-3g/L

Temperature: 60 ℃ -80 ℃

Time: 20-40 minutes

Product Usage:

Suitable for pre-treatment or dyeing in the same bath process of nylon, polyester and their blended fabrics.

Product Transportation And Storage:

50kg plastic drum, sealed storage, shelf life of 6 months at room temperature.


    Return